Call Us: (559) 222 - 3131

Protective & Marine Coatings

Amerlock 2 VOC

Amerlock 2

Amerlock 2 is an opaque surface tolerant, fast dry epoxy coating capable of low-temperature cure that is available in a wide variety of colors. Amerlock 2 is a semi-gloss coating in appearance and is used to coat compromised surfaces such as tightly adhering corrosion and tightly adhering coatings. Amerlock 2 will coat carbon steel, prepared non-ferrous metals, prepared stainless steel and SSPC-SP10 and SP5 blasted-steel as a lining for water tanks and large diameter pipe. Amerlock 2 is NSF approved.

PSX 700


Conventional wisdom says you need a three-coat system to obtain the optimum corrosion resistance of a zinc primer, an epoxy midcoat, along with the long-term gloss and colour retention of an aliphatic polyurethane finish. Revolutionary new thinking from PPG proves otherwise.

Now, with just 1 coat of zinc primer, plus 1 coat of our breakthrough PSX siloxane-epoxy, you’ll get performance equalling or surpassing the finest three-coat systems available today. With PSX 700, you no longer need a costly polyurethane topcoat to attain outstanding weatherability, exterior gloss and colour retention.

Amershield VOC

Amershield aliphatic polyurethane coating (polyurethane paint) and Amershield VOC aliphatic polyurethane coating (polyurethane paint) can be thinned with one of several thinners. The most common thinner is Amercoat 65 for use in Amershield but for better flow out and an improved finish we recommend Amercoat 923 or Amercoat 911 thinner.


One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650°C (1200°F) and for cryogenic service on stainless steel from -185°C to 538°C (-300°F to 1000°F). Also to be used as a primer on non-insulated steel in a system with PPG HI-TEMP topcoats.

The Kasparian Difference

We have a knowledgeable sales force dedicated to recommending only the appropriate products that will perform in the manner in which you would expect them to.

Because we are locally owned, we add the personal touch to your project that the “Big Box” stores do not. We don’t want to “just sell you paint,” we would like to become your paint supplier!

Subscribe to News/Events

Download Credit Application


4635 N. Cedar Ave.
Fresno, California 93726
Phone: 559-222-3131
Fax: 559-222-3339

Hours of Operation

7am to 5pm
7am to 5pm
7am to 5pm
7am to 5pm
7am to 5pm
8am to 12pm